Disclaimer: This post may contain affiliate links, meaning we get a small commission if you make a purchase through our links, at no cost to you. For more information, please visit our Disclaimer Page.
Ethernet is necessary for the world of gaming. It is a popular form of network connection that helps people increase their internet speed. Gamers find it especially crucial since it enhances their performance when playing PS4 and other game consoles.
The minimum internet speed for playing games is 3 Mbps of download speed. However, the Ethernet cable will significantly increase the speed and change your PS4 experience. Ethernet is worth the investment, and if you are a little more skilled, you can always increase your speed when you get stuck.
Keep reading to find more about the Ethernet connection and how to improve it.
Table of Contents
What Is a Fast Connection Speed for PS4?
Internet connection plays an important role in gaming. Whatever game you play, you need a good internet connection to have the best possible performance. Each game console manufacturer recommends a certain speed that suffices for playing games.
Good internet speed for gaming is 3 Mbps of download speed, 0.5 Mbps to 1 Mbps of upload speed, and ping rate less than 150 ms. The number of devices you have connected to your device will also affect your gaming.
A higher internet speed gives you the ability to transfer more data, which offers more freedom, so other network constraints are less likely to interfere with your gaming.
For PlayStation, there are requirements all games must meet to appear on the PlayStation platform.
PlayStation does not specify minimum internet speed requirements, but based on general guidelines these are download speed of 16 Mbps, upload speed of 4 Mbps, and ping rate less than 50 ms.
If you meet these requirements, it is more than enough for playing your favorite games.
Also, PS4 has a great network card. It allows up to 1000 Mbps and full speed potential of a 2.4 GHz WI-Fi signal (up to 450 Mbps).
Although it can handle these speeds, it is unlikely you will achieve it. These are theoretical maximums that do not have to work perfectly.
In an ideal world, PS4 could handle the speed of a physical network. Then, you should probably have a gigabit service at home.
Unfortunately, we seem to be far from achieving this. Therefore, standard requirements are fast enough for you to enjoy your game.
However, if you wondered whether it can be faster, then the answer is yes. Your PS4 can handle a fast connection of 1000 Mbps with Ethernet cable and less than 450 Mbps using Wi-Fi.
Does Ethernet Cable Make PS4 Faster?
It is not uncommon for your Wi-Fi connection to be low when playing PS4. When that happens, consider switching to a wired connection.
When PS4 connects to your Wi-Fi connection, you may experience a slow internet connection, because of the distance between the console and the modem.
Ethernet cable does a lot when this appears. With Ethernet cable, your PS4 and Internet modem has a direct connection via Ethernet cord. This means your connection will be reliable and faster, which is important for gaming.
A wired connection to your PS4 is worth the investment. Ethernet cable provides you with faster speed than a wireless connection, but importantly, it provides stability. Modern routers can also give you speed that is more than enough for PS4 gaming.
However, latency always causes problems while playing games. In this case, the Ethernet cable is your friend. A wired connection will remove issues that lead to poor connection on your PS4.
When you try using an Ethernet cable for a stable connection, you will never go back to wireless.
The minimum speed with a standard Ethernet cable is up to 100 Mbps, but there are also gigabit Ethernet systems that will operate at 1000 Mbps. They are common, and many gamers opt for them.
Of course, PS4 has its advantages, such as convenience. With Ethernet cable, it is a hassle trying to find the right port to use. It is simpler for people to use a Wi-Fi chip. Otherwise, there are not other important advantages. That is why it is beneficial to switch to wireless.
If you are ready to invest some money, I recommend an Ethernet cable for your connection. It will give you a whole different experience while playing, and you will see the results immediately.
Your internet speed will jump to a massive number of Mbps. Even those who have significantly slow internet connections should see improvement by going wired.
Let’s learn how to make your Ethernet faster.
How Do You Make Your PS4 Ethernet Faster?
One thing PS4 players find annoying is the low internet connection. As previously mentioned, Ethernet cable offers faster network speed than Wi-Fi connection.
However, some issues may cause your Ethernet to slow down, so it cannot perform at its best. There are several ways you can make your Ethernet connection faster and PS4 more enjoyable.
1. Always check whether you properly connected your cable. Ethernet cables are fragile, they twist and break. Due to that, you can end up with a slower or even failed connection.
Therefore, always check whether you connected the cable correctly. When you fix it, your connection will be much faster.
2. Changing DNS has helped many people, and it does not require a lot of tinkering. If you want to give it a try, do this:
3. Find “Settings” on your PS4 scrollbar, just before the Power option.
4. Go to the Network options and choose “Set up Internet Connection.”
5. Then select Wi-Fi or LAN. You need to choose LAN because you want to increase its speed.
6. Select “Custom” to enter your network settings. Use these settings. DNS is the key thing to note:
– IP Address Settings = Automatic
– DHCP Host Name = Do Not Specify
– DNS Settings = Manual
– Primary DNS: 8.8.8.8
– Secondary DNS: 8.8.4.4
– MTU Settings: Automatic
– Proxy Server: Do Not Use
The way of improving Ethernet speed for your PS4 is by changing the cable. Ethernet cables have specific category ratings. If a cable is of a higher category, it means your device will be faster.
For instance, if you are using Cat 3 or Cat 5, your Ethernet will be slow in relation to the speed you should receive.
Choose shorter Ethernet cables (such as Cat 6), because they can boost speed. Cat 6 is the most advanced type of cable. If you are not sure what type of Ethernet cable you have, look at various intervals on the cable’s external casing to find its type.
Sometimes your adapter will refuse to get along with your Ethernet connection. One of the easiest ways to fix it is to restart your adapter.
In your Network & Internet settings select “Change adapter options.” Click on your Ethernet connection and disable it. Then, enable it again after a few seconds.
You can also make your Ethernet faster by disabling any VPN options. VPN usually slows things down. Make sure to disconnect it, because it will increase your Internet speed.
Last but not least, scanning for malware will make your Ethernet faster as well. Some types of malware use network resources, stealing bandwidth from your device and making it slower.
When this happens, your programs and games that depend on the network will run much slower. Install some good anti-virus programs, scan your device and delete all malicious files.
Do not forget to delete all the unnecessary files. If your computer does not have enough free hard drive speed, it can affect the overall performance of the computer and slow down your Ethernet connection.
Conclusion
I hope you have learned something useful about Ethernet on your PS4. If you are a gamer who wants to improve his experience, always go for Ethernet network.
The wireless network will increase your speed and resolve your issues. Follow some of these tips to make your connection even faster.